/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M6 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  40
tbdel,bh,arg1
tb,bh,arg1,,22
!TBPT,,     8.0    , .70
TBPT,,    11.9    ,1.09
tbpt,,    15.91   ,1.28
TBPT,,    28.     ,1.50
TBPT,,    47.7    ,1.61
TBPT,,    79.6    ,1.67
TBPT,,   159.1    ,1.738
TBPT,,   318.2    ,1.795
TBPT,,   556.9    ,1.815
TBPT,,   795.5    ,1.83
TBPT,,  1591.1    ,1.885
tbpt,, 3182.2     ,1.945
tbpt,,  5568.     ,1.97
tbpt,,  7955.     ,1.98
tbpt,, 15911.     ,2.000
tbpt,, 31822.     ,2.03
tbpt,, 63644.     ,2.078
tbpt,,127287.     ,2.166
tbpt,,254574.     ,2.334
tbpt,,509149.     ,2.6604
tbpt,,763723.     ,2.99






/gopr