/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M43 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  30   !  
TBPT,,  79.6     ,  .465
TBPT,,  159.2    ,  .92   ! 2
TBPT,,  318.3    , 1.16
TBPT,,  795.8    , 1.34   ! 4
TBPT,,  1592.    , 1.51
TBPT,,  3183.    , 1.625  ! 6
tbpt,,  4775.    , 1.665
tbpt,,  6366.    , 1.695! 8
tbpt,, 7958 .    , 1.725
tbpt,, 15915.    , 1.85
tbpt,, 31831.    , 1.96
tbpt,, 47746.    , 2.01
tbpt,, 63662.    , 2.03
tbpt,,127324.    , 2.134
tbpt,,254648.    , 2.326
tbpt,,509296.    , 2.678
tbpt,,763944.    , 3.01



/gopr