/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M4 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  40
tbdel,bh,arg1
tb,bh,arg1,,22
TBPT,,     8.8    , .70
TBPT,,    11.9    ,1.07
tbpt,,    15.91   ,1.26
TBPT,,    28.     ,1.503
TBPT,,    47.7    ,1.61
TBPT,,    79.6    ,1.65
TBPT,,   159.1    ,1.72
TBPT,,   318.2    ,1.78
TBPT,,   556.9    ,1.822
TBPT,,   795.5    ,1.85
TBPT,,  1591.1    ,1.90
tbpt,, 3182.2     ,1.95
tbpt,,  5568.     ,1.975
tbpt,,  7955.     ,1.98
tbpt,, 15911.     ,1.995
tbpt,, 31822.     ,2.023
tbpt,, 63644.     ,2.071
tbpt,,127287.     ,2.159
tbpt,,254574.     ,2.327
tbpt,,509149.     ,2.6534
tbpt,,763723.     ,2.978






/gopr