/nopr
/COM,ANSYS REVISION  5.6   
/NOP
/COM,Internal UNITS set at file creation time = SI   (MKS)
/COM,M2 Steel
/COM,********* Typical B-H properties for demo purposes *********
TBDEL,ALL,arg1
MPDEL,ALL,arg1
TB,BH  ,arg1 ,   1,  40
tbdel,bh,arg1
tb,bh,arg1,,22
TBPT,,    11.5    , .70
TBPT,,    15.9    ,1.14
TBPT,,    28.     ,1.4
TBPT,,    47.7    ,1.55
TBPT,,    79.6    ,1.65
TBPT,,   159.1    ,1.72
TBPT,,   318.2    ,1.775
TBPT,,   556.9    ,1.805
TBPT,,   795.5    ,1.84
TBPT,,  1591.1    ,1.897
tbpt,, 3182.2     ,1.95
tbpt,,  5568.     ,1.962
tbpt,,  7955.     ,1.97
tbpt,, 15911.     ,1.99
tbpt,, 31822.     ,2.02
tbpt,, 63644.     ,2.068
tbpt,,127287.     ,2.156
tbpt,,254574.     ,2.324
tbpt,,509149.     ,2.6504
tbpt,,763723.     ,2.975






/gopr