SOME COMMON PROCEDURES

  1) To build a 3D  model

     Alter the parameters by editing a file *.des or read in an
     existing *.des (see examples below)  file and changing the
     parameters in the  Utility>parameters>scalar

     When switching from one motor type to another, it is reccommended
     to first clear the data base.  The Toolbar will automatically be
     reinstalled.

            EXAMPLE DESIGN PARAMETER FILES:

      mach2_3d.des      10 pole , PM on rotor, 1/5 th model
                        parallel magnization
                        (contains example winding in mach2d.wnd)



     <BUILD3D>      ( builds the 3D periodic model and full winding)

     <ROTATE>       ( moves the rotor for the specified mechanical degrees,
                      enter 4 to rotate the rotor 4 mechanical degrees)

     <LOAD>         (adjusts the coils for the input current, enter 80 electrical
                     degrees for 10 peak amps)


  2)   To Solve

     <SOLUTION>     ( performs a SINGLE solution, linear or nonlinear)

  3)   To post process, use the <maghelp> to review the post processing
       features.