! TITLE: str_tube_slev_375a080-2.parm (ISS) ! !--------------------------------------------------------------------------- ! Rev - 11/06/2000 J. Rinaldi !--------------------------------------------------------------------------- ! ! This is the parameter file used in the construction of the stator ! tube sleeve, P/N 375A080; Used by part macro STR_TUBE_SLEV_375A080.MAC. ! ! !--------------------- a.) Part Name Selection Variable -------------------- ! name='stat080' arry_nam='stt80' ! !--------------------------- b.) Model C.S. Names -------------------------- ! ct_name='stCS00' ! cartesian cyl_name='stCS10' ! cylindrical sph_name='stCS20' ! spherical ! !--------------------------------------------------------------------------- ! tol1=0.005 ! tolerances relevant to analysis tol2=0.0005 tol3=0.003 tol4=0.002 ! rfil1=0.010 ! fillet radii rfil2=0.005 rfil3=0.312+tol1-.040 rfil4=0.020 rfil5=0.015 rfil6=0.125 rfil7=0.093 rfout=2.000 ! outer radius of the flange (pattern 1) rff=0.250 ! flange fillet radius ! chmf1=0.040 ! chamfer dimensions chmf2=0.062 chmf3=0.125 ! h1=0 ! distance of features along +z axis h3=0.150 h4=0.115 !h5=0.358 h5=0.165 h2=h5-h4-h3 h6=0.188 h7=0.318-h6 h8=0.443 h10=0.054 h11=0.056+.050 h12=(2.280-tol1)+h5 h13=(2.227+tol4)+h5-.040 ! rbp=2.000 ! radius of bolt pattern rbf=0.295 ! radius of bolt flange dbh=0.194 ! diameter of bolt hole rbh=(dbh/2)+.070 ! radius of bolt heads dfl=2.500 ! flange diameter nh=6 ! number of flange holes ptang=30 ! total angle of hole pattern bang=60 ! bolt pattern angle w_oring=0.115 ! O-ring width parameter ! r1=2.250/2 ! radial distances from z axis r2=2.400/2 r3=2.498/2 r4=rbp+rbf ! r4 measured at outer bolt flange r5=3.461/2 r6=1.893/2-tol2/2 r7=1.863/2+tol3/2 ! -.001 r8=3.256/2 r9=3.112/2 r10=3.004/2 ! O-ring radial location *if,assemble,eq,1,then enable='3d' sym_=1 ptang=90 *endif