!   TITLE:  ms_cut.parm
!
!---------------------------------------------------------------------------
!       Rev -   07/19/2000  J. Rinaldi
!---------------------------------------------------------------------------
!
!   This is the parameter file used in the construction of the mirror
!   support, MS_CUT.MAC.
!
!---------------------------------------------------------------------------
!
!
!--------------------- a.) Part Name Selection Variable --------------------
!
name='mir_supt'
arry_nam='mirsp'
!
!--------------------------- b.) Model C.S. Names --------------------------
!
ct_name='CSmirsp0'  ! cartesian
cyl_name='CSmirsp1' ! cylindrical
sph_name='CSmirsp2' ! spherical
!
!---------------------------------------------------------------------------
!

f_bend=1

l1=7.125-2.336              !----- See figure 1. -----
l2=2.336+2.450
l3=1.004
l4=1.006
h1=3.800/2
h2=h1
phi1=13.4
!
h3=1.280                    !----- See figure 2. -----
h4=0.755        !was .780
phi2=9
dlj=2.150
drj=1.160
d1=0.9839
d2=0.369*2
d3=0.439*2
d4=0.4990
extd1=dlj
!
ribw=0.200                  !----- See figure 3. -----  ! 0.200
lrext=4.336
llext=4.364
l5=lrext
l6=3.636
l7=l6-ribw
l8=2.736
l9=l8-ribw
l10=1.836
h5=.360     ! 0.360
h6=.200     ! 0.200
h7=0.420
phi3=5      ! 5
rfil=.060
!
l11=0.800                   !----- See figure 4. -----
l12=1.200
h8=0.625
h9=3.220
phi4=60
dcut=0.220
!
l13=0.825                   !----- See figure 5. -----
l14=2.975
h10=0.120
chmf1=0.225
chmf2=0.100
phi5=30
!
l15=2.614                   !----- See figure 6. -----
l16=1.300
rrad=0.250
!
dhole=1.95          !was 1.025
dbore1=2.5          !was 1.754
dbore2=1.612        ! use in:    elev_reslvr_adaptor.mac
h11=0.909           !was .935
l17=0.324           !was .439
!
boredpth=h11-l17
extd2=5.366-l1
extd3=0.322
extd4=0.532
dos=2.000
!
l18=0.340
l19=.054
l20=0.336
l21=0.675
l22=5.044
extd5=9.992-l22-l2
!
l23=0.3220125
l24=0.3170125

xcenter=2.336               ! X distance from -Z- to center hole
xbandj=7.125                ! X distance from -Z- to cast band journal
tside=-xbandj+xcenter+l22+extd3-extd4 ! Thickness of flange by the band journal

! Hole pattern on the back - added to allow balancing of elev axis
hdia=.688
hdepth=.190
*dim,xh,array,3
xh(1)=2.5
xh(2)=3.5
xh(3)=4.375
yh=.50

! Additional cut on back to clear increased size gimbal with the larger
! torquer stator

width1=3.000
depth1=.295
ycut=.096
rcut=.125
cham1=.250